APS Spring 2012 : Page 98FLYING SCOT 3/32” Jib Halyard 1/16” Main Halyard Wire Halyards Replacement halyards have a captive Wichard key shackle (WC81432) nicopressed on. Both use type 302/304 stainless steel, 7x19 wire. The jib halyard is 3/32”; the main 1/16”. FLYS101 Main Halyard $61.91 FLYS103 Jib Halyard $52.52 Flying Scot Spinnaker Poles Guy Hooks Hook with a rubber gate to keep the Spinnaker sheet from falling out. Standard on newer boats and easily retrofitted. RF91 $19.51 2:1 Flying Scot Clew Blocks Samson Amsteel Spectra and Harken 29mm T2 blocks. Spliced so the lazy block, when used for windward sheeting, pulls from the mid loop splice at an optimal angle. FLYS201 $65.82 Our basic 1-1/2” diameter parallel pole has Allen nylon ends with stainless spring plungers and a stainless eye strap installed in the center for the topping lift. Our most popular option is the Selden pole tapering from 48mm to 25mm letting you use smaller and lighter Selden ends with the stiffness in the middle of a much larger pole. A “D” ring is seized to the center of the pole for the topping lift and the seizing is epoxied to keep the line from loosening. The third option is a 1-1/4” diameter Forte parallel carbon pole. For unrivaled strength and stiffness, these poles have no seams as they are woven on a four-axis braid. There is a “D” ring seized and epoxied on the center and smooth action Selden ends are used. All poles come with a trip line and are made to class maximum length. Oversized shipping applies. FLYS500 1-1/2” Parallel Aluminum Pole $261.94 FLYS501 48mm Tapered Aluminum Pole $236.39 FLYS502 1-1/4” Parallel Carbon Pole $455.90 Images are not to scale. 5/32” Shroud 3/32” Forestay Heavy Duty Forestay & Extender Go to apsltd.com for information on providing us with your length requirements. 1/8” Heavy Duty Forestay 3/32” Forestay Extender 1/8” Heavy Duty Forestay Extender 3/32” Jib Tack Extender 360 o Swivel Cam Cleat Mount RL860WO Mounts on vertical surfaces. Line feeds up through tube and over a sheave to a swiveling cleat base. The large is pre-drilled to fit standard Ronstan (RF5010) or Harken (H150, H365) cams. The mini is pre-drilled to fit the small Ronstan (RF5000) or Harken (H468, H471). Both have the same mounting hole pattern. RL860WO For Large Cleats $72.49 GMW101 For Small Cleats $54.99 Rebuild Kit for RL860 860RB Shrouds Jib Sheets Everything needed to make your tired swivel as good as new, at a fraction of the cost. RL860RB $9.61 Made of 5/32”, 1x19 wire with strap forks and swaged ball stops on each end. Just pin them on and go sailing. FLYS200 $69.47 Forestays You have a choice. 2:1 tapered, “Y” tapered or non tapered. 2:1 tapered sheets use our Flying Scot 2:1 Clew Block Bridle (FLYS201). Covers are stripped back to save on weight. The stripped end, once led through a clew block, is tied back to the jib lead car. With our “Y” tapered sheets we take two lines stripped back and splice (brummel) them together. FLYS010 5/16” Maxibraid Plus, Tapered 2:1 $121.96 FLYS011 5/16” MaxibraidPlus, “Y” Tapered $141.85 FLYS012 3/8” Maxibraid Plus, “Y” Tapered $169.35 FLYS013 5/16” Salsa, Non Tapered $68.20 FLYS014 3/8” Salsa, Non Tapered $89.00 Made of 3/32”, 302/304, 1x19 stainless steel wire with a swaged eye at the top and a strap fork with swaged stop ball. FLYS300 $42.61 Made of heavier duty & more durable 1/8” 1x19 wire with a swaged marine eye end at the top and a fork at the bottom. FLYS310 $65.12 Forestay Extenders Flying Scot Mainsheets Both stripped lines we use have a hard-wearing polyester cover with SK75 Dyneema cores for low stretch and no water absorption. We strip the cover back so the small diameter core can zing through your blocks, while keeping it in the areas you cleat and handle. If stripped sheets are not your thing, we offer a cut length of Salsa or Buzz line with whipped ends. FLYS001 5/16” MaxibraidPlus, Tapered 3:1 $118.70 FLYS002 3/8” Maxibraid Plus, Tapered 3:1 $151.70 FLYS003 5/16” Salsa, Non Tapered 3:1 $86.50 FLYS004 3/8” Salsa, Non Tapered 3:1 $117.70 FLYS005 5/16” Buzz, Non Tapered 3:1 $46.30 FLYS006 5/16” Maxibraid Plus, Tapered 2:1 $96.50 3/32”, 1x19 wire with a strap fork and swaged stop ball on top with a stud on the other. Screws into your existing turnbuckle. FLYS301 $35.31 1/8”, 1x19 wire for increased strength and durability with an aircraft eye on the top and a stud on the bottom. The eye fits together with the fork on the 1/8” forestay. Stud screws into a Ronstan turnbuckle. If you are using a 3/32” forestay you will need to replace the turnbuckle. Visit us online for more details and options including extenders for open body turnbuckles. FLYS311 $36.16 Jib Tack Extension 3/32”, 7x19 wire with a strap fork with swaged ball stop at the boat end and a Wichard key shackle nicopressed on sail end. FLYS400 $47.08 Centerboard Gasket Material 3” Dacron-reinforced Mylar is used as gaskets on the underside of the centerboard trunk. You need a total of 10’ (5’ per side). SS75 $2.48/ft. Spinnaker Sheets Bow Floatation Bag Our lightest sheets made of New England Flight Line. It has a low stretch SK75 Dyneema core and a nice polypropylene cover. Neither material absorbs water. We strip the cover back to save on weight. Both ends are whipped. We also offer unstripped sheets made with Ultra Lite. This line is a polypropylene cover and a polypropylene/Spectra blended core. Both ends whipped. FLYS020 1/4” Flight Line, Stripped $74.00 FLYS022 1/4” Ultra Lite $45.70 PVC buoyancy bag provides 350 pounds of flotation. Has loops to guide three webbing straps (not included) for installation. 33” x 36” x 14”. HASB2101 $90.00 Bottom Cover by Sailors’ Tailor Spinnaker Halyard Napbac canvas with a soft flannel-like interior protects the bottom and sides from dirt and rocks on the road. 5/16” shock cord in the hem, webbing loops for cross ties, and mesh drainhole. Gray. SATFLYS101 $429.24 We can make these out of many different 3/16” lines, but we like these the best. Swiftcord is soft, easy to hold, low stretch, and does not absorb water. Super Pre-Stretch is heat set pre-stretched polyester. It tends to be a bit stiffer than other lines, which allows it to zing out on a spinnaker douse. We offer a shorter version for cleating off forward and a longer to lead aft. Both ends whipped. FLYS030 Super Pre-Stretch (Led Forward) $31.10 FLYS031 Swiftcord (Led Forward) $36.30 FLYS032 Super Pre-Stretch (Led Aft) $36.90 FLYS033 Swiftcord (Led Aft) $43.40 Trailering Mooring Cover by Sailors’ Tailor Use for trailering and mooring. Lies flat over the deck for trailering and can be drawn up for water runoff while mooring. 5/16” shock cord in the hem holds 6” below deck level on the hull. Tie-down points, heavy duty nylon zipper, mast collar with drawcord and flaps that snap around the shrouds. Reinforced at back corners, fairleads, and cleat areas. Made of Polyester Duck. Gray SATFLYS102 $453.52 Mooring Cover by Sailors’ Tailor Topping Lift 98 Swiftcord is soft, easy to hold, low stretch, and does not absorb water. Super PreStretch is heat set pre-stretched polyester. Ends whipped. FLYS040 Swiftcord $22.10 FLYS041 Super Pre-Stretch $19.50 Full deck over-boom cover with heavy duty nylon zipper running from mast to sidestay and a flap that snaps over the zipper to protect it from sunlight. Mast collar with drawcord closure. Flaps that snap around stays. 5/16” shock cord in the hem. Large screen at the aft end and vent over front deck. Reinforced at back corners, cleats and fairleads. Polyester Duck. Gray. SATFLYS103 $520.83 Padded Rudder Bag by Sailors’ Tailor Page 136 Find More Info and Shop 24/7 at www.APSltd.com Made of hard wearing nylon with closed cell padding. Center carry handle and Velcro opening. Colors: Navy or Gray. SATFLYS105 $80.55 Flying ScotPublication List Using a screen reader? Click Here |
