APS Spring 2012 : Page 95Snipe Selden Mast & Boom The Selden 2420 “Miracle” Mast and Boom are available ready to sail with all halyards, Page 136 spreaders and shrouds included. Mast Complete includes pre-swaged shrouds and forestay. See www.apsltd.com for Selden spar parts and accessories. SLDD14C0600520R 2420 Mast Complete w/ Rig Pack $1,562.00 Tuning and Better Boat Handling SLDD14C0600520 2420 Mast Unrigged $1,258.00 Two DVD set includes land/water instructions and commentary SLDB0710520 Boom Complete w/ Outhaul $404.00 from champions George Szabo, Greg Fisher, Dave Hughes, Brian Janey, and Brian Bissel. SCI003 $49.95 Tacktick Compasses SNIPE Sidewinder Pole Launcher System Made to class maximum length. Sidewinder fittings listed below fit Forespar 1-1/4” aluminum pole blanks. Blanks available in 10’ sections only. This Goes Where? For the beginner Snipe sailor -information on rigging, parts, launching, and maneuvering your boat around a dock. SCI002 $20.00 Part # SWD012 SWD013 SWD014 FP500014 H2149 SNIPE102 Description Price Trumpet End -Pole Launcher $$47.60 Sliding Collar -Pole Launcher $47.60 End with Sheave -Pole Launcher $86.80 1-1/4” OD x 0.05 Wall Thickness, 12’ long $223.20 Single Block Tied to the Mast at Gooseneck for Launching Line $30.32 Complete Whisker Pole with Sidewinder Fittings $427.43 APS067 APS068 Andersen Bailers Page 117 Snipe GRP Mast Fittings for Whisker Pole Blocks These mast fittings serve two purposes. One is to hold the whisker pole block (not included) and the other is to protect the mast. SWD016 Fiberglass Fitting $96.00 PER102 Carbon Fitting $190.64 Snipe Zhik Hiking Straps Add the tenacious grip of the Zhik Hiking System to your Snipe. See the previous page for more details. Need 4 straps per boat. ZHS139SNIPE $55.00 DaKine Snipe Forestays We make it easy to replace your forestay with Sidewinder-style rigging. 3/32”, 1 x 19 wire. The eyes use a 3/16” pin and your choice of a T-terminal or J-hook mast termination. Please provide your existing rigging measurements from bearing surface to bearing surface. Before placing your order, go to apsltd.com/HowtoMeasureStandingRigging. APS067 T-Terminal to Eye $44.28 APS068 J-Hook to Eye $46.74 APS061 Padded Neoprene. Velcro adjustable foot strap. DK4300100 $$18.00 each Boomkicker Snipe Main Sheets Boom support for an open leach in light air. www.apsltd.com SOK312 $76.50 We use 5/16”, low stretch, non-water absorbing materials. All ends are whipped, terminations brummel spliced (can’t pull out) and tapered. All our mainsheets are made using 5/32” AmSteel Sidewinder-style rigging is easy to order and works on many mast types. We use 2.5mm (Dyneema) tails that allow us to make a smooth, bump free transition from the sheet to the tails. Maffioli Swiftcord $88.54 (3/32”), low-stretch Dyform wire. The end fittings accept a 3/16” pin and are available in SNIPE400 FSE Racing Sheet $92.94 a fork for the single plate of a Staymaster adjuster (rightside up) or in an eye for double SNIPE402 Yale Ph.D. $86.78 plates (turned upside down). Both have T-terminals. Provide your existing rigging SNIPE403 measurements from bearing surface to bearing surface. Before placing your order, go to apsltd.com/HowtoMeasureStandingRigging. APS061 Eye to T-Terminal (pair) $122.12 Double braid: seized and hand stitched APS062 Standard Fork to T-Terminal (pair) $126.88 Snipe Shrouds APS062 Swiftcord with Shackle Snipe Main Halyard Sidwinder-style wire halyard (no halyard lock stop), has a small Allen Brothers halyard shackle on the working end of 7x19, 3/32” wire with a wire loop formed at the other end incorporating an imported, very narrow nico sleeve (reducing halyard catching as it exits the bottom mast cut out/exit). Includes 1/8” Amsteel tail spliced to the wire loop. APS063 $73.64 Snipe Jib Halyard Sidewinder-style wire halyard, has a small Race Lite shackle on the working end of 7x19, 1/8”wire, with a wire loop formed at the other end incorporating a very narrow nico sleeve (reducing halyard catching as it exits the bottom mast cutout). Includes 1/8” Amsteel tail spliced to the wire loop. APS064 $62.40 We make our shackle sheets with low stretch, non-water absorbing 1/4” lines. The middle of the line is doubled over a small screw shackle. Double braid lines (SNIPE220) are double seized, hand stitched (see exploded view above) and shrink wrapped for a clean, snag free attachment. Single braids (SNIPE210) are brummel spliced for cleaner running and reduced weight. “Smooth Tack” sheets (SNIPE20_) have an eye splice in the middle with continuous cover that ensures smooth tacks and jibes. Luggage tag to your jib and go. SNIPE200 1/4” Maxibraid Plus “Smooth Tack” Sheets with Brummel Eye Splice $107.36 SNIPE201 1/4” Endura Braid “Smooth Tack” Sheets with Brummel Eye Splice $117.72 SNIPE210 1/4” Maffioli Swiftcord with Shackle $62.88 SNIPE220 1/4” Ultra-Lite with Shackle $60.15 Snipe Jib Sheets Snipe Tow Line Barber Hauler Tested at the PanAm Games and found to work extremely well. 1/8” Amsteel is spliced to a Harken 29mm T2 block (H2146). Super light and smooth running. SNIPE151 $40.43 Tapered Pole Launching Line Satisfies the 2011 rule change requiring tow lines. All are 15m (50 ft) of 5/16” or larger diameter line that won’t absorb any water. End whips. SNIPE500 3/8” Dinghy Tow Rope -Most Durable Option SNIPE501 3/8” Nylon Brait -Stretchy to Reduce Shock Loads SNIPE502 5/16” Marstron -Lightest Weight Option $45.40 $39.40 $37.40 3/16” FSE Dinghy Control line is just stiff enough to allow the line to zing in and out. Both ends whipped. SNIPE110 $59.90 Sidewinder Spreaders SK332H Many more Snipe parts, including canvas StayMasters SK332 SWD002 SWD003 SWD030 Spreader Bracket -For use with Sidewinder or Selden (Proctor) Spreaders Fixed Spreaders with Fixed Outboard Ends (pair -not pictured) Adjustable (calibrated) Angle and Adjustable Outboard Length Ends (pair) $100.80 $60.80 $341.60 Rudder Fittings Pintles & Gudgeons For 2.5mm (3/32”) wire. With or without a welded sheet hook. SK332 Without hook $38.95 SK332H With hook $48.95 Selden (Proctor) Spreaders SLD52218101 SLD155008 SLD522177 SLD50375701 SLD155640 SLD50080101 Sidewinder Parts Goosenecks, vang reinforcements, mast and boom parts www.apsltd.com Customer Service M-F: 9-5 EST. 800.729.9767 Spreader Bracket -For Use with Selden 2420 Mast Replacement Slot-Head Screw for Inboard Angle Adjuster (one) Replacement Inboard Screw Angle Adjuster without Screw (one) Snipe Spreaders with Adjustable Outboard and Inboard Ends (pair) Replacement Metric Pivot Screw and Nut (one) Replacement Adjustable Outboard End (one) $86.00 $2.00 $36.00 $184.00 $3.00 $21.00 95 SnipePublication List Using a screen reader? Click Here |
