APS Spring 2012 : Page 77

SPINNAKER POLES Foreguy Lazy Sheet Spin Pole Lazy Guy Determining Pole Length Sheet Reaching Strut Primary Main Boom Secondary Fairlead Block After Guy The length of your spinnaker pole is determined by the yacht's "J" measurement. This is roughly the straight line distance from the front of the mast at deck level to the headstay at deck level. Forespar finished pole lengths are overall (including tube and both ends fittings). Shown with optional Kevlar chafe protection Big Boat Carbon Fiber Spinnaker Poles Turning Block Big Boat Aluminum Spinnaker Poles These poles have a double bridle topping lift/foreguy system. Unless otherwise specified, all standard poles are supplied with the throat (jaw) facing upward. These poles are custom made by Forespar to your required length and shipped directly to your door. Part # End Fittings Pole dia. Length Price FP304100 UXP-UXP 1.5" 7.8’ or less $301.84 FP304101 UXP-UXP 2.0" 9.5' or less $482.52 FP304102 UXP-UTR 2.0" 9.5' or less $548.32 FP304103 UTR-UTR 2.0" 9.5' or less $586.24 FP304104 UXP-UXP 2.5" 11.5' or less $696.80 FP304105 UTR-UXP 2.5" 11.5' or less $696.68 FP304106 UTR-UTR 2.5" 11.5' or less $740.80 FP304107 UXP-UXP 3.0" 13.6' or less $788.36 FP304108 UTR-UXP 3.0" 13.6' or less $803.96 FP304109 UTR-UTR 3.0" 13.6' or less $914.16 FP304110 UXP-UXP 3.5" 15.5' or less $1,099.20 FP304111 UTR-UXP 3.5" 15.5' or less $1,150.84 FP304112 UTR-UTR 3.5" 15.5' or less $1,192.52 Lighten up! Carbon poles are an easy way to rid your boat of excess weight and improve foredeck crew work -best of all there's no installation. Just order it, stick it on board and go. All poles come standard with EZ Grip (matte finish). AwlGrip high gloss (FP800096/94) or color coat is available, please specify color (FP800093/89). Optional 24" Kevlar chafe patches prevent "forestay rash" ($188.00 each -FP800091). Optional retracting bridle on 3" or larger TS or UTS inboard ends ($168.00 -FP800090). Shipping in the continental US is about $155 for small to mid size poles. All 2", 2.5" and 3" poles come with Spectron 12 bridles standard (no extra cost). All poles incur packing charges of up to $64 on poles under 5” and $217 on poles 5” and larger. Carbon poles are made-to-order and cannot be returned. Allow two-week minimum. Part # End Fittings Pole dia. Length Bridles Price Straight Non-Tapered Spinnaker Poles FP800901 UXP-UXP 2" 10' or less Double $989.00 FP800101 UXP-UXP 2.5" 12' or less Double $1,154.00 FP800102 UTR-UTR 2.5" 12' or less Double $1,237.00 FP800201 UXP-UXP 3" 14' or less Double $1,772.00 FP800202 UTR-UTR 3" 14' or less Double $1,832.00 FP800203 UTS-UTR 3" 14' of less Double $1,842.00 FP800301 UTR-UTR 3.5" 16.5' or less None $2,034.00 FP800302 UXP-UXP 3.5" 16.5' or less None $1,879.00 FP800303 UTS-UTR 3.5" 16.5' or less None $1,979.00 FP800304 UTS-UGPS 3.5" 16.5' or less None $2,073.00 FP800404 UTS-GP 4" 18.5' or less None $2,832.00 FP800405 UTS-UGPS 4" 18.5' or less None $2,863.00 FP800501 UTS-GP 4" 22.5' or less None $3,136.00 FP800503 UTS-UGPS 4" 22.5' or less None $3,240.00 Double Tapered Spinnaker Poles FP800504 UTS-GP 4.5" to 3.5" 22.5' or less None $5,501.00 FP800505 UTS-UGPS 4.5" to 3.5" 22.5' or less None $5,444.00 FP800601 TS-GP 5.0" to 3.5" 24.5' or less None $6,893.00 FP800701 TS-GP 6.0" to 4.0" 28.5’ or less None $7,775.00 End fitting part numbers containing a "U" are composite, all others are anodized aluminum castings. Call for information on larger poles. Forte Carbon Spinnaker Poles -Dinghy & Keelboat Forte designs and builds these carbon fiber tubes with strength, durability and weight in mind. These are not a pre-preg construction. All tubes are continuous fiber construction -no seams to fail. Parts are computer engineered, then manufactured with a tandem triaxial braiding line. This braiding line incorporates CTBN toughened resin, carbon warp yarns, continuous carbon weft yarns and S2-glass bias yarns. The parts are built to specific lengths and weights, and may be straight gauge or tapered. Each part is designed to achieve maximum performance and durability. Super strong and stiff. Our Forte poles are completely assembled and ready for your boat, including trip lines and one of the following: double center whipped and epoxied rings (WR), Spectra bridles with rings (BR), or topping lift pennant (TP). The FCTF350TS pole can be tapered to at one end. Call with your specific needs. We’ll build to suit. These are the only carbon poles we know of that come with a lifetime warranty on the tube --that’s just how strong and durable they are. Part # FCTF1001 FCTF1251 FCTF150P FCTF200P FCTF225P FCTF250P FCTF250T FCTF300P FCTF300T FCTF300TS FCTF350TS ID” 1.00 1.25 1.50 2.00 2.25 2.50 2.50 3.00 3.00 3.00 3.5 OD” 1.25 1.44 1.70 2.25 2.50 2.80 2.80 3.20 3.20 3.20 3.75 Lift WR WR WR WR BR BR BR BR BR TP TP End Fittings Tube Length RWO R4221 up to 8’ RWO R4231 up to 9’ UXP 150 FP304054 up to 10’ UXP 150 FP304054 up to 12’ UXP 150 FP304054 up to 12’ UXP 200 FP304050 up to 12.5’ UTR 200 FP304060 up to 12.5’ UXP 300 FP304052 up to 15’ UTR 300 FP304062 up to 15’ UTR 300 FP304062/UTS 300 FP304080 up to 15’ UGPS 300 FP304021/UTS 300 FP304080 16 -20’ Boat Size Reference Thistle, 505, FD Lightning, Yngling, 110 E-Scow, Soling J/22, Pocket cruiser PHRF 22-26’ J/29, Olson 30, Tartan 10 J/29, Olson 30, Tartan 10 J/35, Farr 33 J/35, Farr 33 J/35, Farr 33 TP52, OP50’s, SC50 Price $462.72 $488.53 $720.38 $821.50 $948.64 $1,205.91 $1,350.04 $1,727.73 $1,879.64 $1,956.48 $2,347.12 Selden Tapered Spinnaker Pole Kit Find Forespar’s aluminum and carbon struts and whisker poles online... Selden tapered poles are tempered after being extruded for strength. Built with the ever popular Selden 1.5" cast aluminum ends that take all the abuse you give them. These ends are so good we commonly find other pole manufacturers using Selden ends on their tubes. Part # Description Price SLDS0630525 Sonar Pole Complete $450.00 SLDS0630786 J/24 Pole Complete $450.00 SLDS0630515 E22 Pole Complete $450.00 SLD5355151 Blank 63mm pole, 94-120” (2390 -3070mm) $348.00 RWO Non-Tapered Dinghy Spinnaker Pole Kits Reaching struts also available in carbon fiber -call for a custom strut quote. length Each kit includes anodized aluminum tubing, robust nylon/stainless steel end fittings. One end is left loose so you can cut tubing to desired overall length and then fasten the end fitting. Less than 10 minutes to complete. R4288 1" Diameter Tubing, 62" Kit $144.25 R4290 1.25" Diameter Tubing, 77.5" Kit $177.25 Customer Service M-F: 9-5 EST. 800.729.9767 77

Spinnaker Poles

Previous Page  Next Page

Publication List
Using a screen reader? Click Here