APS Spring 2012 : Page 163Dyneema/Vectran Single Braids AmSteel Blue -Samson Part #: SMAB 100% Dyneema SK75 Dyneema offers a hard-to-beat combination of properties. SK-75 has low creep and is good for high static-load jobs. The fiber is UV-stable and abrasion resistant; The Samathane coating further enhances both of these "natural" properties. Dyneema does not absorb water, so it stays lightweight. For better handling and cleating, we can cover all or part of the line with a polyester jacket. For better heat or abrasion resistance, we can cover it using one of our high tech covers. Common applications (uncovered): Primaries in cascades, vangs, traveler bridles, trapezes on dinghies. Great as a wire replacement. Common applications (covered): Lightweight sheets for big boats, all halyards, tack lines. Size inch ~mm Tensile 7/64 2.7 1,600 1/8 3 2,300 5/32 4 4,000 3/16 5 5,400 1/4 6 8,600 5/16 8 13,700 3/8* 9.5 19,600 7/16* 10 23,900 * Gray only Splice?: Yes Full Spool: 600' + 10% off Size inch ~mm Tensile 1/8 3 2,600 3/16 5 6,100 1/4 6 9,700 5/16 8 15,400 3/8 9 22,100 Splice?: Yes Full Spool: 600' + 10% off Lbs./100 ft. 0.30 0.50 0.75 1.00 1.60 2.65 3.72 4.22 Price $.31 $.51 $.83 $1.02 $1.60 $2.65 $3.73 $4.23 AS-90 -Samson Dynex Dux 75 -Hampidjan 100% Dyneema SK90 AS-90 uses Dyneema SK90 to create a 12-strand line that provides a 12% increase in strength with less elongation during an increasing load when compared with other Dyneema fiber lines. Maintains the lightweight, durable and easy handling characteristics of all Dyneema lines Common applications (unocovered) : Multi-part purchase systems; wire replacements. Common applications (covered) : Lightweight sheets for big boats, main and headsail halyards, running backstays and afterguys. Part #: SMAS90 Lbs./100 ft. 0.50 1.00 1.50 2.60 --Price $1.14 $1.81 $2.51 $4.06 $5.57 100% Heat Set Dyneema SK75 A 12-strand braided line made with Dyneema SK75, Dynex Dux 75 is pre-stretched by heating the line under tension, further aligning and compacting the fiber structure. This process leads to gains in strength of up to 40% over other Dyneema SK75 options, elminating any creep or static load elongation. Also impregnated with UC and abrasion inhibitors for a long working life. For better handing or cleating, we can add a polyester or high tech cover over any desired length. Common applications (uncovered): Steering cables, backstays and other applications that need high strength, low stretch and greater durability than Vectran. Common applications (covered): Main and headsail halyards--especially on big boats. Afterguys and asymmetrical tack lines. Part #: ANNDD ~inch 3/16 9/32 3/8 7/16 Size mm 5 7 9 11 Tensile 10,494 16,411 26,527 40,465 Lbs./100 ft. TBD 2.28 3.62 5.57 Price $2.85 $4.16 $6.70 $10.22 Splice?: Yes Vectrus 12 -Yale 100% Vectran Single Braid The single-braid construction of this line takes maximum advantage of the strength, negligible stretch, low weight and downsizing capabilities of Vectran. The line will not absorb water and its coating provides a great UV stability and improves abrasion resistance. One of the easiest to splice of all our single braided lines. For better handling or cleating, we can add a polyester cover over any desired length. Common applications (uncovered): Primaries in cascades, vangs, traveler bridles, trapezes on dinghies. Great as a wire replacement. Common applications (covered): Main and headsail halyards--especially on big boats. Afterguys and asymmetrical tack lines. Part #: YCVEC Size inch 1/16* ** 1/8 5/32 3/16 1/4 5/16 3/8* 7/16* mm 1.75 3 4 5 6 8 9.5 10 Tensile 800 2,000 3,200 4,500 8,000 11,500 16,000 21,400 Lbs./100 ft. 0.30 0.50 0.80 1.20 2.20 3.30 4.70 6.30 Price $.29 $.43 $.80 $.85 $1.31 $1.92 $2.72 $3.59 Paraloc Interlocking Braid Marlin -Paraloc Part #: PARMR Splice?: Yes, * Gold only, Full Spool: 600' (**1200’) + 10% off Size ~inch mm Tensile Lbs./100 ft. 5/32 4 n/a n/a 1/4 6 3,500 1.27 5/16 8 4,400 2.15 ~7/16* 10 5,500 3.15 Splice? Brummel splices by APS only Full Spool: 656' + 10% off. *Blue Only Size ~inch mm Tensile Lbs./100 ft. 5/64 2 550 0.34 1/8 3 1,160 0.47 5/32 4 2,200 0.81 3/16 5 3,300 1.21 1/4 6 5,280 1.68 5/16 8 8,800 3.02 7/16* 10 11,440 4.37 1/2* 12 16,060 7.06 * Red only Size ~inch mm Tensile Lbs./100 ft. 5/32 4 1,880 1.01 1/4 6 4,180 2.02 5/16 8 6,680 3.56 7/16 10 9,830 5.31 1/2 12 13,970 7.53 Splice? Brummel splices by APS only. Full Spool: 656' + 10% off. Cover: Polyester Core: Dyneema SK-75 Dyneema SK75 core for no-stretch performance, surrounded by a smooth spun polyester cover making it easy to hold and secure in cleats. Dyneema core keeps water retention to a minimum. Common applications : Kink and twist free sheets, control lines and small boat spin halyards. Price $.90 $1.07 $1.52 $2.57 Piranha -Paraloc Part #: PARPR Cover: Polyester Core: Dyneema SK75 Designed specifically for use as sheets and halyards. Dyneema SK75 core delivers extremely no stretch performance and an abrasion resistant cover ensures long life. Through Paraloc construction, the clutch, cleat, and winch loads are transferred from the sheath to the Dyneema core. Cover slip is completely eliminated. Common applications : Halyards, especially spinnaker. All sheets. High Splice? Brummel splices by APS only. load control lines. Full Spool: 656' + 10% off. Price $.36 $.56 $.74 $1.01 $1.56 $2.67 $3.95 $6.23 Shark -Paraloc Customer Service M-F: 9-5 EST. 800.729.9767 Cover: Technora Core: Vectran Shark was developed for halyard and heat/abrasion resistant sheets. Thanks to its Vectran core and Technora cover, Shark guarantees minimal stretch for upwind halyards and great abrasion resistance for both halyards and sheets. The sheath also stands up to the heat generated on winch drums when sheets are highly loaded. Common applications : Headsail and main halyards, afterguys, asymmetric tacklines. High performance sheets and guys that require the ultimate durability on winches. Part #: PARSK Price $.74 $1.62 $2.67 $4.09 $6.43 163 Publication List Using a screen reader? Click Here |
