APS Spring 2012 : Page 104J/24 J/24 Main Halyard We make these with either a shackle or a whipped end for tying on. All have a reeving eye on the tail for easy installation. Cleated on the mast. For more information, go to www.apsltd.com/J24. J24100 5/16” Vectrus 12, Whipped Ends $130.91 J24101 5/16” Crystalyne, Whipped Ends $110.12 J24102 5/16” V-100, Whipped Ends $130.28 J24103 5/16” VPC, Whipped Ends $79.25 J24104 5/16” Sta-Set, Whipped Ends $57.83 J24110 5/16” Vectrus 12, Shackle $169.15 J24111 5/16” Crystalyne, Shackle $160.70 J24112 5/16” V-100, Shackle $181.50 J24113 5/16” VPC, Shackle $128.85 J24114 5/16” Sta-Set, Shackle $97.75 J/24 Shrouds Jib Halyard We offer 1/4” Vectrus 12 covered in the middle for cleating, 5/16” covered line stripped to a 1/4” vectran core or four 1/4” covered halyards. All have an RF6110 snap shackle and a reeving splice for easy installation. To be cleated on the mast. For more information, go to www.apsltd.com/J24. J24160 1/4” Vectrus 12, Covered in the Middle $191.85 J24150 5/16” Crystalyne, Stripped End to 1/4” $180.67 J24151 5/16” V100, Stripped End to 1/4” $197.32 J24130 1/4” Crystalyne, Covered $153.69 J24131 1/4” V-100, Covered $158.33 J24132 1/4” VPC, Covered $124.11 J24133 1/4” Sta-Set, Covered $102.93 J24134 1/4” Paraloc, Shark $166.74 We produce new standing rigging two ways. Either ship your old rigging for us to duplicate or we can work from measurements you provide. Set your rigging to its normal rig tension (medium air) and tape/pin turnbuckles before sending it to us. Before ordering go to apsltd.com/ HowtoMeasureStandingRigging. We offer J/24 shrouds in 3/16” 1x19 or 5mm Dyform wire; with open body or Ronstan calibrated turnbuckles and T-balls on the mast side. If your t-ball backing plate is mounted to your mast with two rivets above the hole, you have the older style (smaller) t-balls/plates and our stock rigging will not fit. Call for more information. J24300 Upper, Dyform, Ronstan Calibrated $242.38 J24301 Upper, Dyform, Open Body Turnbuckle $199.34 J24302 Upper. 1x19, Ronstan Calibrated $194.75 J24303 Upper, 1x19, Open Body Turnbuckle $159.85 J24310 Lower, Dyform, Ronstan Calibrated $194.26 J24311 Lower, Dyform, Open Body Turnbuckle $151.22 J24312 Lower, 1x19, Ronstan Calibrated $170.75 J24313 Lower, 1x19, Open Body Turnbuckle $135.85 J/24 Forestay We produce new standing rigging two ways. Ship your old rigging for us to duplicate or we can work from measurements you provide. Made with 3/16” 1x19 or lower stretch 5mm Dyform wire; toggle jaw with 3/8” pin on the deck end and an aircraft eye on the other. For more information and before ordering go to apsltd.com/HowtoMeasureStandingRigging. J24330 1 x 19 $132.75 J24331 Dyform $185.92 J/24 Backstay Spinnaker Halyard Line needs are a bit more straight forward for this halyard. The slightly firmer, Super Pre-Stretch and Dinghy Control lead to take downs where the halyard runs out quickly. Available with a spliced RF6110 shackle or just whipped for tying on. Cleated on the mast. For more information, go to apsltd.com/J24. J24170 1/4” Maxibraid Plus $75.76 J24171 1/4” Endura Braid $90.32 J24172 1/4” MLX $74.72 J24173 1/4” Super Pre-Stretch $45.60 J24174 1/4” Paraloc Marlin $64.84 J24175 1/4” Maxibraid Plus with Ronstan Nicro Snap Shackle $151.15 J24176 1/4” Endura Braid with Ronstan Nicro Snap Shackle $166.55 J24177 1/4” MLX with Ronstan Nicro Snap Shackle $146.27 J24178 1/4” Dinghy Control with Ronstan Nicro Snap Shackle $157.20 We produce new standing rigging two ways. Ship your old rigging for us to duplicate or we can work from the measurements you provide. Set your rigging to your normal rig tension (medium air) and tape/pin turnbuckles before sending it to us. Made with 5/32” 1x19 wire. The upper has an aircraft eye on the mast end and a fork on the lower. The lower legs have a Johnson calibrated adjuster and a fork on the other. For more information and before ordering go to apsltd.com/ HowtoMeasureStandingRigging. J24320 Upper Backstay $89.48 J24340 Lower Backstay Leg (1) $104.51 Fit these onto your shrouds and say goodbye to your wrench. Third Hands hold the shroud stud stationary while you spin the turnbuckle for easy one handed rig adjustments. Measure your flats first if you have old turnbuckles. OBM0041 1/4” Stud Flats (Open Body Turnbuckles) $70.00 OBM0042 5/16” Stud Flats (Ronstan Turnbuckles) $72.00 J/24 Shroud Third Hands Main Sheet Swiftcord, Salsa and Racing Sheet are soft, low stretch, absorb little or no water and easy to hold on to. MLX is low stretch and long wearing with a more traditional firm feel, but will absorb a bit of water. NewSwift is our lowest stretch option with a firm hand. Both ends are whipped. For more information, go to www.apsltd.com/J24. J24200 9mm Swiftcord $119.00 J24203 3/8” Salsa $108.55 J24205 3/8” MLX $126.15 J24206 3/8” Racing Sheet $139.90 J24207 3/8” NewSwift $151.45 J/24 Spars and Spar Parts Genoa Sheet Our J/24 genoa sheets have hard-wearing polyester covers and feature end whips for top-flight durability. Designed to be attached to the sail in a “luggage tag” manner with the center of the sheet looping through the clew of the sail. Maxibraid Plus has a Spectra core that provides negligible stretch. NewSwift has minimal stretch with a great hand feel and good grip on the winches. Regatta Braid has a soft hand but more stretch and will absorb water. For more information, go to www.apsltd.com/J24. J24220 3/8” Maxibraid Plus $125.64 J24224 3/8” NewSwift $159.28 J24225 3/8” Regatta Braid $54.88 Spinnaker Sheet Sheets are sold individually so order two for a complete set. For more information, go to www.apsltd.com/J24. J24230 5/16” Swiftcord $100.30 J24233 5/16” Ultra Lite $68.95 J24234 5/16” NewSwift $112.40 J24235 5/16” Ph.D. $95.90 J24236 5/16” Racing Sheet $111.30 Part # Description Price CHSFM531 Charleston Spars Mast, Anodized with Spreaders, Hardware $3,781.45 CHSFB531 Boom Complete $983.23 CHSK11867 Spreader Through Bar Upgrade Kit Complete $182.79 CHSK11777J24 Spreader Bar Only $71.56 CHSFS531P Port Spreader (SP2-2) $78.00 CHSFS531S Starboard Spreader (SP2-2) $78.00 CHS32602030050 Spreader Tip (SP2-2) $17.54 CHSK11881 Main Halyard Sheave $20.84 CHSK9523 Main Halyard Sheave Bushing $2.70 CHSP429 Clevis Pin for Main Halyard Sheave $2.05 CHSP461 Clevis Pin for Backstay at Masthead $3.10 CHSK10587 Spinnaker Halyard Sheave $17.09 CHSP422 Clevis Pin for Spinnaker Sheave $2.52 CHSK10545 Jib Halyard Sheave (need two) $20.73 CHSP522 Clevis Pin for Jib Sheave (need two) $2.57 CHSD85783 Spinnaker Pole Mast Bail $47.30 CHSD90228 Vang Mast Bracket $61.03 CHSK1757 Vang Boom Bracket $57.82 CHSK10456 Mainsheet Boom Bail $37.76 Gooseneck Assembly (inboard boom casting with sheave) $253.30 CHSD43022 Outhaul Assembly (outboard boom casting with sheave) $111.70 CHSD43023 Outhaul Sheave for Boom $13.79 CHSK10483 Visit www.apsltd.com for a complete parts listing. Additional shipping applies to masts/booms Loos Tension Gauge The LS90 is the traditional spring metal design. LSPT2 is the professsional coil spring type and has improved accuracy and durability. Easier to use than traditional gauges. Includes instructions and wire gauge. LSPT2 For 3/16"-1/4" wire $111.72 LS90 Large, for 3/16"-9/32" wire $77.53 LSPT2 LS90 JCD Mast Blocks 104 Find More Info and Shop 24/7 at www.APSltd.com Includes 8 x 1/2" Delrin shims with line tug handles for easy removal. JCD303 $150.00 Fitted Mast Block Keeps the mast from moving laterally. Works only for masts centered at the partners. JCD304 $185.00 Racing Mast Boot Newer design is longer fore and aft so you can fully adjust your mast. SG9002400 $59.85 J/24Publication List Using a screen reader? Click Here |
